Undercoating

How To Use

• Usage
  Wheel wells, gas tanks,frames and supports, weld joints, floor pans, doors and quarter panels
• Prep
  Clean surfaces by removing dirt, oil, grease, wax, rust, and loose paint. Thoroughly clean with a mild detergent and dry with a clean cloth. Mask surrounding areas to protect from overspray.
• Application
  Shake can vigorously for three minutes after mixing ball moves freely. Shake can for 10 seconds after each minute of use. To spray, hold can 10-12 inches from surface and use in an even, sweeping motion, overlapping each stroke. Apply 2 light coats, allowing at least 10 minutes between coats. Accidental overspray should be wiped off immediately with a mild solvent.
• Clean Up Disposal
  Use regionally compliant cleaner for cleaning purposes